Īsa informācija
Stāvoklis: jauns
Type: Hot Press
Application: Plywood Working Machine, Doo/Veneer Press
Pressure: 400T
Izcelsmes vieta: Ķīna (kontinentālā daļa)
Firmas nosaukums: EMM
Spriegums: 380V / 50Hz
Power(W): 26KW
Dimension(L*W*H): 3550*1370*4200
Weight: 32T-90T
Certification: CE/ISO9001
Garantija: 12 mēneši
Pēcpārdošanas pakalpojums: Inženieri, kas ir pieejami apkalpošanas mašīnām ārzemēs
Layer spacing: 70 mm
Thickness of the frame: 40mm
Layers: 15
Stroke: 1050 mm
Hot press plate size: 2700*1370*52mm
Control system: PLC with touch screen
Material: Q345B
Cylinder: Wuxi
press platen size: 3'*6'/4'*8'ft
Produkta pielietojums
1 This machine is used for pre-pressing process of making plywood, block board and decorative board.
2 The whole structure is designed and manufactured based on advanced international experience and new technological requirements.
3 The electric system and hydraulic system of the machine have been examined precisely and the free-beam will not fall by its own gravity with results assuring excellent quality.
4 The cylinder is made of super-hard metal,and the seal use low-resistance stepped gaskets, no leakage.
Hot Press Machine For Plywood | |||
Max pressure: | 500 Tons | Svars: | 35Tons |
Board feeding direction: | Šķērsgriezums | Layer spacing: | 70mm |
Layers: | 15 Layers | Numbers of plate: | 16pcs |
Cylinder: | 2*360*1050mm | Cylinder: | 1*180*1050mm |
Stroke: | 1050mm | Compression resistance: | =<25Mpa |
Total power: | 7.5+18.5kw | Thickness of the frame: | 35mmQ235 |
Low pressure pump flowing: | 250ml/r*pcs | High pressure pump flowing: | 100ml/r*pcs |
Working methods: | Full automatic | Upper and bottom beam: | 900mm |
Hot platen:
1. It is drilled from excellent carbon solid steel and it is high precision, high strength and durable.
2. It is manufactured on special workable., so as to keep the hot platen easy to operate.
Heating system
1. It can be heated by steam boiler, oil heater or electric oil heater.
2. The steam boiler is low in cost and suitable for common production, yet it is high pressure vessels, so it should be operated carefully.
Control system
1. Micro-computer, manually/ automatic controlled
2. It can lift the hot platen, close the seperation, add the pressure, keep the presssure, keep time, descend the hot platen and so on.
Cylinder
1. it is made from excellent carbon solid steel and it is high strength and durable.
2. It uses high quality oil envelop so as to avoid of oil leaking
